Share this page:

ProMelt Cal - Calcium Chloride Liquid Ice Melt

ProMelt™ Cal is a high performance Calcium Chloride liquid that delivers immediate results in cold temperatures. The use of ProMelt™ Cal will improve salt’s melting capabilities, burning through hard pack and breaking the bond with the road surface, saving you time, money and providing safer roads.

Spec Sheet sds

 

Features and Benefits

ProMelt™ Cal is a premium liquid de-icer that is economical and an effective way to keep your roads safe.

  • Versatile liquid that can be used to anti-ice, de-ice and pre-wet.
  • Salt pre-wetted with ProMelt™ Cal works at lower temperatures than traditional dry salt.
  • Reduces bounce and scatter and salt application rates, which saves time, labor, fuel and materials.
  • Exothermic nature creates heat during chemical reaction causing immediate melting in cold temperatures.

Comparative Effective Temperatures During Dilution

Comparative Effective Temperatures During Dilution

Product Properties

Recommended Conc. 32% Calcium Chloride
Physical State: Liquid
Appearance | Odor: Clear colorless | Odorless
Specific Gravity: 1.319 0 g /mL
pH: 7.0 to 11.0 in 10 % water solution

Product Application

ProMelt™ Cal is specifically designed for anti-icing, direct application de-icing, frost prevention and prewetting of solids. Typical liquid application guidelines are:

Anti-Icing
Application rates of 16 - 29 gallons per lane mile are typical. Up to 38 gallons per lane mile should be considered the maximum in any anti-icing situation.
Direct Liquid Application De-Icing
Application rates of 38 - 42 gallons per lane mile.
Frost Prevention
Application rates of 8 - 16 gallons per lane mile are standard. These rates can vary depending on storm conditions and service level goals.
Pre-wetting
Application rates from 5 - 15 gallons per ton of substrate, depending upon the solid used and the performance objective. ProMelt™ Cal is available in 30% and 32% concentrations.

 

Disclaimer: Application rates are just guidelines. The end user is recommended to adjust application rates based on weather conditions, level of service goals and experience. The guidelines presented are made without guarantee, warranty or responsibility of any kind on our part.

To get the best solution for your particular situation, please contact us.