Share this page:

ProMelt Ultra 2000

ProMelt Ultra 2000 inhibited is a high performance deicing liquid made from refined corn carbohydrate derivative blended with magnesium chloride. Best used for stock pile treatments, ProMelt Ultra 2000 delivers unparalleled performance in colder temperatures.

Spec Sheet Ultra 2000 sds Ultra 2000


Features and Benefits

ProMelt Ultra 2000 inhibited deicer significantly improves the eutectic point and phase change properties of MgCl2. ProMelt Ultra 2000 inhibited has the extremely low eutectic point of approximately -85° F.

  • Salt pretreated with ProMelt Ultra 2000 inhibited works at lower temperatures than traditional dry salt.
  • Reduces bounce and scatter there by reducing salt application rates which saves time, labor, fuel and materials.
  • Meets the stringent requirements of the PNS (Pacific Northwest Snowfighters) for corrosion, toxicity and performance.
  • Strong residual effect provides lasting performance.
  • Better for the environment – our magnesium chloride is approved for organic production as a crop fertilizer and soil amendment by OMRI in the US and Canada.

Comparative Effective Temperatures During Dilution

Comparative Effective Temperatures During Dilution

Metal Corrosion Tendency

De-Icing Fluid PNS
Relative Corrosion Rate
Distilled Water 0
ProMelt Ultra 2000 Inhibited 26.2
Magnesium Chloride 80
Rock Salt (NaCI) 100
Calcium Chloride 30% 121

Typical Product Application Rates

ProMelt Ultra 2000 inhibited is specifically designed for pre-wetting of solids. Typical liquid application guidelines are:

Salt Stock Pile Treatment
Apply 6-10 gallons per short ton of salt. The moisture content of the salt will determine the amount of liquid to apply.

Sand Stock Pile
Treatment Apply 4-6 gallons per short ton of sand or sand salt mix. The moisture content and type of the sand will determine the amount of liquid to apply



Disclaimer: Application rates are just guidelines. The guidelines presented are made without guarantee, warranty or responsibility of any kind on our part.

To get the best solution for your particular situation, please contact us.