ProMelt Plus™ high-performance chlorides and corrosion inhibitor

Premium blend of high-performance chlorides and corrosion inhibitor delivering strong melting capabilities, long lasting performance.

Spec Sheet SDS Get a Quote

Features and Benefits

ProMelt Plus™ is a premium liquid de-icer that is economical and an environmentally effective way to keep your roads safer.

A versatile liquid that can be used to anti-ice, de-ice and pre-wet.
Salt pre-wetted with ProMelt Plus™ works at lower temperatures than traditional dry salt.
Reduces bounce and scatter and salt application rates, which saves time, labour, fuel and materials.
Less corrosive than salt brine.
Better for the environment.
Lower working temperatures for safer roads.
Odorless, non foaming, crystallization free product.
Naturally clear liquid or add a tint for visible application.
Strong residual effect reduces need for reapplication.
Less corrosive to vehicles.
Less damaging to infrastructure than salt or salt brine.

Comparative Effective Temperatures During Dilution

Metal Corrosion Tendency

De-Icing Fluid	QPL Relative Corrosion Rate
Distilled Water	0
ProMelt Plus	34
Magnesium Chloride	80
Rock Salt (NaCI)	100
Calcium Chloride 30%	121

Typical Product Application Rates^*

ProMelt Plus™ is specifically designed for anti-icing, direct application de-icing, frost prevention and pre-wetting of solids. Typical liquid application guidelines are:

Anti-Icing

Application rates of 40 - 70 litres per lane kilometre are typical. Up to 90 litres per lane kilometre should be considered the maximum in any anti-icing situation.

Direct Liquid Application De-Icing

Application rates of 90 - 100 litres per lane kilometre.

Frost Prevention

Application rates of 20 - 40 litres per lane kilometre are standard. These rates can vary depending on storm conditions and service level goals.

Pre-wetting

Application rates from 20-60 litres per ton of substrate, depending upon the solid used and the performance objective.

^*Application rates are just guidelines. The end user is recommended to adjust application rates based on weather conditions, level of service goals and experience. The guidelines presented are made without guarantee, warranty or responsibility of any kind on our part.

ProMelt Plus™